All Public Circuits

Now showing circuits 20001-20020 of 52653. Sort by recently modified name

	First-Order Non-Ideal Current Source PUBLIC A non-ideal current source has an finite internal resistance in parallel with the current source. by UltimateElectronics | updated December 23, 2020
	DC Sweep of First-Order Non-Ideal Voltage Source PUBLIC This simulation shows a how a nonzero internal resistance makes a voltage source be non-ideal. by UltimateElectronics | updated December 23, 2020
	First-Order Non-Ideal Voltage Source PUBLIC A non-ideal voltage source has a nonzero internal resistance. by UltimateElectronics | updated December 23, 2020
	Ideal Current Source DC Sweep PUBLIC An ideal current source does not change in current as its terminal voltage difference is changed. by UltimateElectronics | updated December 23, 2020
	Ideal Voltage Source DC Sweep PUBLIC An ideal voltage source does not change voltage under a variable current load. by UltimateElectronics | updated December 23, 2020
	Ideal Voltage and Current Source Symbols PUBLIC The schematic symbols for the ideal voltage source and ideal current source are shown and labeled. by UltimateElectronics | updated December 23, 2020
	Ideal Op-Amp with Finite Gain and Gain-Bandwidth Product: Laplace Block Model PUBLIC The frequency response of a real op-amp is well modeled with two parameters: an open-loop DC gain, and a gain-bandwidth product. These two parameters can be modeled in a single Laplace Block. by UltimateElectronics | updated December 23, 2020
	Ideal Op-Amp with Finite Gain: Laplace Block Model PUBLIC An ideal op-amp with finite gain can be modeled using a Laplace Block to represent the open-loop gain. by UltimateElectronics | updated December 23, 2020
	Op-Amp with Voltage Rails as Analog Comparator PUBLIC The op-amp with voltage rails can be used as an analog voltage comparator by connecting the two voltages to be compared to the op-amp's two inputs. by UltimateElectronics | updated December 23, 2020
	Op-Amp With and Without Voltage Rails DC Sweep Comparison PUBLIC This simulation compares the open-loop DC Sweep behavior of an op-amp with and without voltage rails. by UltimateElectronics | updated December 23, 2020
	Ideal Op-Amp with Voltage Rails Symbol PUBLIC Op-amps have positive and negative voltage rails which limit the ability of the output to swing too high or too low. This can result in clipping. by UltimateElectronics | updated December 23, 2020
	Ideal Op-Amp Subtraction and Multiplication PUBLIC The ideal op-amp essentially produces its output voltage by subtracting the voltage difference between its inputs, and multiplying this difference by a large open-loop gain. by UltimateElectronics | updated December 23, 2020
	Ideal Op-Amp Symbol PUBLIC The ideal op-amp has three terminals: non-inverting (+) input, inverting (-) input, and output. by UltimateElectronics | updated December 23, 2020
	Signal, Earth, Chassis Ground PUBLIC Signal ground, earth ground, and chassis ground are the three most common types of grounding connections you'll see on a schematic. by UltimateElectronics | updated December 23, 2020
	Parallel Plate Capacitor with Interstital Plate PUBLIC When a third plate is inserted between the two plates of a parallel plate capacitor, charges separate in the third plate to cancel the field within itself, and consequently the electric field gets... by UltimateElectronics | updated December 23, 2020
	Parallel Plate Capacitor PUBLIC A parallel plate capacitor has equal and opposite surface charges on the inner surfaces of the two plates, leading to parallel electric field lines in the small gap between the plates. by UltimateElectronics | updated December 23, 2020
	Induced Electrostatic Charge PUBLIC Charges are free to move within conductive materials. This can be taken advantage of by bringing a charged object near a conductive object to create induced charge separation. by UltimateElectronics | updated December 23, 2020
	Voltage Controlled Voltage Source (VCVS) Example PUBLIC In a Voltage Controlled Voltage Source (VCVS), the voltage difference across this element depends on a voltage difference elsewhere in the circuit, multiplied by some gain. by UltimateElectronics | updated December 23, 2020
	Voltage Controlled Current Source (VCCS) Example PUBLIC A Voltage Controlled Current Source (VCCS) has a current equal to some voltage difference elsewhere in the circuit multiplied by a gain. by UltimateElectronics | updated December 23, 2020
	Current Controlled Voltage Source (CCVS) Example PUBLIC A Current Controlled Voltage Source (CCVS) has a voltage difference equal to some current elsewhere in the circuit multiplied by a gain. by UltimateElectronics | updated December 23, 2020

Tags

555   7805   ac-to-dc   active-filter   amplifier   analog   and   anode   attenuator   atx   audio   automotive   band-reject   bandgap   behavioral   bias-point   bjt   bode   bridge-rectifier   button   calculator   cascaded-filters   cascode   cathode   cmos   colpitts   compensation   constant-current-source   current-limiting   current-mirror   current-monitor   current-regulator   dac   dc-to-ac   device-modeling   differential   differentiator   digital   diode   divider   emitter-follower   feedback   filter   flyback   flyback-diode   frequency-domain   full-wave   guitar   ham-radio   high-pass   high-speed   high-voltage   hv   hysteresis   ic   ignition-coil   induction   inductive   inductive-load   initial-conditions   instrumentation-amplifier   integrator   inverting   jfet   laplace   led   led-array   level-shift   lighting   lipo   lm317   load-cell   logic-gate   low-pass   mechanical   microcontroller   microphone   mosfet   motor   multivibrator   non-inverting   nonlinear   nor   notch   ohms-law   op-amp   optical   or   oscillator   parallel   passive   passive-filter   pcb-design   phase-shift   photodiode   photoresistor   phototransistor   piezo   plants   potentiometer   power   power-supply   power-supply-unit   preamp   pull-down   pull-up   pwm   rc   relaxation-oscillator   relay   resistor-ladder   resonance   rf   rlc   rom   saturation   schmitt-trigger   sensor   series   servo-motor   signal   spark-plug   stability   stepper   summing   superposition   switching   time-constant   transformer   transistor   translinear   twin-t   voltage-divider   voltage-regulator   waveform-arithmetic   wiring   xnor   xor   zener-diode   zero-voltage-switching  

---

New @ CircuitLab
KraigK started discussion: "Can the rise time of switch..." 2 hours ago
jallen21 saved circuit: "Autosave 2025-10-08T17:05:11.965Z"
fadyf33 saved circuit: "ACTUAL FINAL"
Kurtus saved circuit: "MOSFET Fuzz Circuit 4"
maxwellmarco1727 asked: "take my online class"
anyamittal saved circuit: "FINAL circuit diagram meam510 final"
sansuisteve replied to discussion: "Circuit won't simulate - ADCOM..."
xixit50280 answered: "How did your electronics journey..."
smithjohns answered: "Hopefully a Simple Ask"
artist5 asked: "Vacuum tubes"
drayrealize answered: "Hopefully a Simple Ask"
JamesRolfe asked: "Relay With Custom Trigger Voltage"
slicemasternet asked: "slicemasternet"
kalerecovery answered: "Hopefully a Simple Ask"
roninhehe commented on question: "Clock Chime Circuit"
vicentewilson commented on question: "Clock Chime Circuit"
nestnutritious commented on question: "Photo Cell LED Night Light Burns..."
BarryFields started discussion: "CLK duty cycle simulation"
vanderghast commented on question: "Hopefully a Simple Ask"
Kurtus replied to discussion: "Frequency Domain Simulation dBV..."
CircuitLab Blog: "Live DC Simulation!"
CircuitLab Blog: "Digital Adders and Wider Muxes"