Username signality
E-mail
Member Since March 7, 2012

signality's Public Circuits:

Now showing circuits 181-200 of 310. Sort by

Ramped and glitched signals and supplies 01

Ramped and glitched signals and supplies 01 PUBLIC

Ways to ramp up and put glitches in signals and supplies. Simulate > Time Domain > Run Time-Domain Simulation See also: [circuitlab]hsss64[/circuitlab]

by signality | updated November 01, 2012

glitch   initial-conditions   pwl   pws   ramped-supply   startup  

voltage controlled oscillators 01

voltage controlled oscillators 01 PUBLIC

Two ways to generate a voltage controlled sine wave. One way to generate a voltage controlled triangle wave and one way to generate a voltage controlled sawtooth wave. Simulate > Time Domain > Run...

by signality | updated October 31, 2012

function-generator   modulation   oscillator   sawtooth-generator   sine-wave-generator   synth   triangle-generator   triangle-wave   voltage-controlled  

amplitude modulation 02

amplitude modulation 02 PUBLIC

Deconstructing amplitude modulation. Simulate > Time Domain > Run Time-Domain Simulation

by signality | updated October 30, 2012

amplitude-modulation   carrier   lower-sideband   lsb   upper-sideband   usb  

amplitude modulation 01

amplitude modulation 01 PUBLIC

The equivalence of amplitude modulation created by multiplying a carrier by a modulator and by summing sum and difference frequencies with the correct +/-90 degree phase relationships. Simulate > Time...

by signality | updated October 30, 2012

amplitude-modulation   sidebands   sum-and-difference  

behavioural resistor 01

behavioural resistor 01 PUBLIC

A behavioural resistor where the resistance is programmable by the voltage on the 'resistance' net. SImulate > DC Sweep > Run DC Sweep

by signality | updated October 30, 2012

behavioural-resistor  

Moog 4th order lowpass ladder filter 01

Moog 4th order lowpass ladder filter 01 PUBLIC

The basic lowpass filter designed by Robert A. Moog and used in the early analogue Moog synthesisers. Simulate > Frequency Domain > Run Frequency-Domain Simulation. You can also; Simulate > Time...

by signality | updated October 29, 2012

filter   lowpass   moog   synth   synthesiser   synthesizer   voltage-control  

Moog sawtooth to triangle converter 01

Moog sawtooth to triangle converter 01 PUBLIC

A version of the sawtooth to triangle wave converter designed by Robert A. Moog and used in his classic early analogue synthesisers. Simulate > Time Domain > Run Time-Domain Simulation

by signality | updated October 26, 2012

converter   full-wave-rectifier   moog   sawtooth   synth   synthesiser   synthesizer   triangle  

power in circuit 01

power in circuit 01 PUBLIC

Currents, power and energy around a simple LR circuit.

by signality | updated October 24, 2012

energy   imaginary-power   inductor   power   power-dissipation   power-loss   real-power  

behavioural window comparator 01

behavioural window comparator 01 PUBLIC

A behavioural window comparator

by signality | updated October 21, 2012

window-comparator  

modulated sources 01

modulated sources 01 PUBLIC

Four ways to generate an amplitude modulated signal. One way to generate a frequency modulated signal and one way to generate a phase modulated signal. Simulate > Time Domain > Run Time-Domain...

by signality | updated October 09, 2012

am   amplitude   amplitude-modulation   fm   frequency   frequency-modulation   phase   phase-modulation   pm   user-library  

LDR switched LED 01

LDR switched LED 01 PUBLIC

Simple light operated switch turns LED on as light level reduces and off as light level increases. No filtering to smooth out light fluctuations due to passing shadows. Based on 2 transistor Schmitt...

by signality | updated October 08, 2012

ldr   light-operated-switch  

LDR switched LED 02

LDR switched LED 02 PUBLIC

Same as LDR switched LED 01 but voltage controlled resistor, I_LDR, models LDR with light input modelled by V(ctrl) Simulate > Time Domain > Run Time-Domain Simulation

by signality | updated October 08, 2012

ldr   light-operated-switch  

Tail Brake Light MOSFET 02

Tail Brake Light MOSFET 02 PUBLIC

by signality | updated October 01, 2012

10% to 90% switched PWM source 01

10% to 90% switched PWM source 01 PUBLIC

A way to generate a pulse train so that it's duty cycle switches from D to 1-D. Implemented by scaling, then inverting and level shifting a CLK source set to a duty cycle D, using the USTEP function....

by signality | updated October 01, 2012

behavioural-source   pwm   ustep  

PWL type source can be used as part of expression 01

PWL type source can be used as part of expression 01 PUBLIC

This circuit demonstrates that PWL(), PWREPEAT(), PWS() and PWSREPEAT() source expressions can be used in a behavioural source as part of a longer expression. In this example, the output of the V1...

by signality | updated October 01, 2012

behavioural-source   pwl   pwlrepeat   pws   pwsrepeat  

Tail Brake Light Test 03

Tail Brake Light Test 03 PUBLIC

by signality | updated September 25, 2012

Tail Brake Light Test 02

Tail Brake Light Test 02 PUBLIC

by signality | updated September 25, 2012

B's pannier lights 04 - PWM version.

B's pannier lights 04 - PWM version. PUBLIC

by signality | updated September 25, 2012

triggered_LED_01

triggered_LED_01 PUBLIC

A simple triggered LED circuit giving an exponentiallly decaying LED flash once per trigger pulse. However, CL struggles to simulate this.

by signality | updated September 24, 2012

> 2 input logic gates

> 2 input logic gates PUBLIC

Some ways to make logic gates with more than 2 inputs.

by signality | updated September 20, 2012

n-input-logic-gates