signality's Profile

Simple cascaded filters 02 PUBLIC

Same as: Simple cascaded filters 01 but with the addition of the same filter implemented as a cascade of Laplace blocks.

by signality | updated March 28, 2012

cascaded-filters   laplace  

Simple cascaded filters 01 PUBLIC

Comparing buffered and unbuffered cascaded filters. Open in editor then: Simulate > Frequency Domain > Run Frequency-Domain Simulation to see Bode plot.

by signality | updated March 27, 2012

cascaded-filters   passive-filter  

XNOR BJT Circuit with 5V joined by wires PUBLIC

by signality | updated March 26, 2012

XNOR BJT Circuit with 5V joined by netnames PUBLIC

by signality | updated March 26, 2012

schmitt input NAND gate PUBLIC

A behavioural model of an schmitt trigger input NAND gate with user adjustable threshold and hysteresis. Based on the behavioural model for an inverting schmitt trigger logic gate.

by signality | updated March 22, 2012

schmitt-input-nand-gate  

inverting schmitt trigger logic gate PUBLIC

A behavioural model of an inverting schmitt trigger logic gate with user adjustable threshold and hysteresis.

by signality | updated March 22, 2012

behavioural-schmitt   inverting-schmitt   schmitt-trigger  

Scaling and offsetting traces PUBLIC

An illustration of how to use expressions to manipulate waveforms to help clarify a complicated or overlapping waveform display.

by signality | updated March 20, 2012

trace-offsetting   trace-scaling   waveform-arithmetic  

Precision current monitor 02 PUBLIC

A precision high side current monitor. Converts a current to ground into a ground referred positive voltage output. Showing DC linearity and transient response.

by signality | updated March 20, 2012

current-mirror   current-monitor   current-sense   high-side   precision-current-source  

Precision current monitor PUBLIC

A precision high side current monitor. Converts a current to ground into a ground referred positive voltage output.

by signality | updated March 19, 2012

current-mirror   current-monitor   current-sense   high-side  

2zeroXornot2zeroX PUBLIC

An illustration of the difference between switching an inductive load at zero crossing (zero degrees) and at peak voltage (90 degrees)

by signality | updated March 13, 2012

inductive-load   zero-voltage-switching