|
|
|
| Username | signality |
| Member Since | March 7, 2012 |
Now showing circuits 121-140 of 310. Sort by
|
|
Guitar pickup model PUBLICModel of a humbucking guitar pickup. Based on a model from: https://sites.google.com/site/distorque/home/articles/spice-humbucker-model by signality | updated May 16, 2012 |
|
|
Guitar Tone Stack 01 PUBLICExample guitar tone stack. From: http://www.duncanamps.com/tsc/ by signality | updated June 18, 2012 |
|
|
Hansen's Active DI Box 02 PUBLICby signality | updated January 14, 2014 |
|
|
headphone jack tester one chan 02 PUBLICCrude linear or log signal amplitude to LED brightness conversion. by signality | updated July 20, 2013 |
|
|
high gain low bw amp for touch switch 01 PUBLICBode plot of the high gain low bandwidth amplifier front end for touch switch: https://www.circuitlab.com/circuit/gezhvv/touch-on-touch-off-switch-01/ Simulate > Frequency Domain > Run... by signality | updated February 21, 2013 |
|
|
high side switch with no-shoot-through driver PUBLICby signality | updated December 06, 2014 |
|
|
HotWheels starter 01 PUBLICby signality | updated December 23, 2015 |
|
|
HotWheels starter 02 PUBLICby signality | updated December 25, 2015 |
|
|
How to draw an arbitrary impedance block (non-simulatable) PUBLICThe name says it all really ... :) by signality | updated January 24, 2014 |
|
|
how to draw arrows in CL 01 PUBLICAt 1304015, CL does not permit the drawing of diagonal or arbitrary lines. So here's a way to draw arrows until it does! Note that rotated arrows may not end up quite where you expect. by signality | updated April 15, 2013 |
|
|
How to set up a sweep to see a hysteresis loop PUBLICA way to set up a DC sweep to show the hysteresis loop of a schmitt trigger. Not easy to understand but have a play to get your head round it. :) by signality | updated January 23, 2014 |
|
|
How to use the CCCS and CCVS elements. PUBLICAn example of how to use the CCCS and CCVS elements. Simulate > Time Domain > Run Time-Domain Simulation by signality | updated June 09, 2012 |
|
|
Ideal Gyrator 01 PUBLICAn Ideal Gyrator model. This example shows a capacitor being gyrated into an inductor. A real inductor is shown for reference and the effect of varying the gyrator ratio is illustrated by the sweep.... by signality | updated May 16, 2012 |
|
|
Ideal Gyrator 02 PUBLICAn Ideal Gyrator model. This example shows an inductor being gyrated into a capacitor. A real capacitor is shown for reference and the effect of varying the gyrator ratio is illustrated by the sweep.... by signality | updated May 16, 2012 |
|
|
ideal series LC and laplace xfer funct PUBLICby signality | updated May 27, 2013 |
|
|
idealised 1:2 step up open loop flyback converter PUBLICUsing the CL transformer to make an idealised 1:2 step up open loop flyback converter. Plots unfiltered primary current showing simulation artifacts and filtered current showing more realistic... by signality | updated June 26, 2014 |
|
|
Inconsistency in using net name as a voltage source PUBLIChttps://www.circuitlab.com/circuit/a5bzf7/good-netname-and-a-free-voltage-source/ shows that a net label can be used to generate an implicit voltage source. This use of the net label appears to work... by signality | updated May 08, 2013 |
|
|
injector pulse timer 01 PUBLICby signality | updated May 12, 2013 |
|
|
instrumentation amplifier 01 PUBLICBasic instrumentation amplifier See: http://en.wikipedia.org/wiki/Instrumentation_amplifier for more information by signality | updated May 23, 2012 |
|
|
inverting schmitt trigger logic gate PUBLICA behavioural model of an inverting schmitt trigger logic gate with user adjustable threshold and hysteresis. by signality | updated March 22, 2012 |