Forums » CircuitLab Support Forum

Hi,

I made a feature suggestion, but it turns out I found a small bug with the button to hide the plot. I’m using OS X 10.6.8 and Safari 5.1.7.

Please see:

https://www.circuitlab.com/forums/feature-requests/topic/xzwy9848/move-plot-out-of-sight/

Regards, Sancho

Well,instead of the text button now there is an icon visible to access the graph, that’s much better, but the issue is still the same:

• It’s unclear where you are and - what - which - button is supposed to do.

When “graph” is active (== visible):

a) Only the “Build” is illuminated, this is wrong.

b) The icon button is grey but is enabled, this is wrong, also the balloon text is wrong (improper in this context).

c) The “Simulate” button is disabled, this is wrong. It should be marked as “active” and on click change over to the simulation view.

In simulation view, the “simulate” correctly is inactive, the (now correctly “active”) graph button leads back to the graph - that’s OK.

The “graph” icon must not act as a toggle switch. A simple radio button interface please, straight forward, no bugs ;-)

Regards, Sancho