|
https://www.circuitlab.com/circuit/z5cjpn/test/ 0V at Node2 would be 0V at both inputs of the NAND which should create a 5V at Node1. But I always get 0V. What did I do wrong? Thanks. |
December 12, 2013 |
|
Shorted the output of the gate to ground! Delete the net (wire) connecting the NODE1 net label back to ground. |
December 12, 2013 |
|
D'oh - yes, sure. Ok - now I have a 1M resistor between the NAND output and GND and all is working. Thanks! |
December 12, 2013 |
Please sign in or create an account to comment.
CircuitLab is an in-browser schematic capture and circuit simulation software tool to help you rapidly design and analyze analog and digital electronics systems.