Forums » CircuitLab Feature Requests

Please forgive if this is already supported by CircuitLab. I would like to inject a custom waveform into my circuit. For example, it should be possible for me to specify that from (t=0 through t=50ms, Vin = 2V and later from t=50ms through t=800ms, Vin = 1.8V and so on). How can I do this today?

there is a "CSV voltage source" that will do esactly that. CSV stands for Comma-separated values. so you might have to mess around with the values to get it to work right but its all there

Yes, Yes and Yes. This was exactly what I had needed. Although a little cumbersome, the CSV feature is invaluable. I used it today and it works like a charm. Thanks so much. :-)