Forums » General Electronics Discussion

Hi there, I was wondering if someone could take a look at this wiring diagram I have put together and let me know if you see any problems or issues with it. I have a 24 volt system with 2 sets of 12 volt batteries and 2 - 24 volt motors.

https://www.circuitlab.com/circuit/ejm7dq/circuit-1/

I had some issues with the wiring the first time I tried to hook it up and ended up frying about $800 worth of motors. They are currently in the shop and the diagram shows how I have the system wired now. I am getting the correct voltage at the plugs for both motors.

Thanks for you help and time.

tp

You must wire each motor and 24V battery through a separate on-off switch: