|
From: https://www.circuitlab.com/forums/support/topic/4zb669ph/error-in-constant-current-source/ But I have slightly different results. AFAIK the issue is with both op amp models below the 741 from the selection box (324 & 358), all above are OK. Here the error only shows up if RL is above the value of R1 (220Ohm), not with the 30 Ohms (Safari 5.1.8). Try e.g. 1k which should work anyway (and works with the 741). Regards, Sancho |
April 15, 2013 |
Please sign in or create an account to comment.
CircuitLab is an in-browser schematic capture and circuit simulation software tool to help you rapidly design and analyze analog and digital electronics systems.