Why we don't use positive feedback

Why we don't use positive feedback

by Chennai_Kaki
November 29, 2022

Positive feedback usually does more harm than good as it drives the system in which it is used into saturation at one limit or the other. Now that I've panned it there was one scheme I know of which made use of it in the distant past. This was the "super regenerative" radio receiver used in the very early days of radio in which a transformer with a movable coil was used to inject a bit of the amplified signal into the input. It worked after a fashion but it would break into oscillation at the least excuse. It is only of historical interest now.

by Foxx
November 29, 2022

In addition to Mr. Foxx' comment, here an extract from Texas Instruments' application note: SBOA093A (which you can download from their main site), page 14: (bold formatting is added by me)


Consider the open loop amplifier used in the circuit of figure 10. Note that no current flows from the source into the inverting input - the summing point restraint derived in the previous section - hence, there is no voltage drop across RS and ES appears across the amplifier input. When ES is zero, the output is zero. If ES takes on any non-zero value, the output voltage increases to saturation, and the amplifier acts as a switch.

The open loop amplifier is not practical - once an op amp is pushed to saturation, its behavior is unpredictable. Recovery time from saturation is not specified for op amps (except voltage limiting types). It may not recover at all; the output may latch up. The output structure of some op amps, particularly rail-to-rail models, may draw a lot of current as the output stage attempts to drive to one or the other rail. For more details on op amps in open loop operation, consult reference 1.


The reference 1 is another of their application note: SBOA092B.

So, unless you want a switch which may latch, or not, ...

by vanderghast
December 03, 2022

1 Answer

Answer by cecid23717

Positive reviews on the Internet are one of the signals about the reliability of the brand, the quality of its goods or services and the trust of the audience. However, there is no categorical separation into black and white here: a positive picture in the review section can be harmful. The question of whether positive reviews are needed or not is still sharply building in many companies. Because of this, on many sites, for example https://riewes.de/, in principle, nothing can be commented on.

0 votes
by cecid23717
December 09, 2022

It seems that there is some confusion.

It is not about consumers feedback.

"In electronics, feedback is defined as the process of returning part of the signal output from a circuit or device back to the input of that circuit or device."

by vanderghast
December 10, 2022

I think cecid23717 is having fun with us

by Foxx
December 10, 2022

Your Answer

You must log in or create an account (free!) to answer a question.

Log in Create an account


Go Ad-Free. Activate your CircuitLab membership. No more ads. Save unlimited circuits. Run unlimited simulations.

Search Questions & Answers


Ask a Question

Anyone can ask a question.

Did you already search (see above) to see if a similar question has already been answered? If you can't find the answer, you may ask a question.


About This Site

CircuitLab's Q&A site is a FREE questions and answers forum for electronics and electrical engineering students, hobbyists, and professionals.

We encourage you to use our built-in schematic & simulation software to add more detail to your questions and answers.

Acceptable Questions:

  • Concept or theory questions
  • Practical engineering questions
  • “Homework” questions
  • Software/hardware intersection
  • Best practices
  • Design choices & component selection
  • Troubleshooting

Unacceptable Questions:

  • Non-English language content
  • Non-question discussion
  • Non-electronics questions
  • Vendor-specific topics
  • Pure software questions
  • CircuitLab software support

Please respect that there are both seasoned experts and total newbies here: please be nice, be constructive, and be specific!

About CircuitLab

CircuitLab is an in-browser schematic capture and circuit simulation software tool to help you rapidly design and analyze analog and digital electronics systems.